Appliance Spares
Quick answer: Buying appliance parts for several jobs a week? Repairers, property managers, installers and facility or caravan-park maintenance crews mostly need the same wear parts: door seals, drain pumps, inlet valves, dryer belts, bearing kits, capacitors and carbon brushes. Match each one to the model number on the sticker, search it on the site or send a list via the contact page, and apply for a trade account. Parts are stocked in Australia and dispatched from Sydney the day you order when it’s in by 12pm Sydney time.
Last updated September 2026
Who buys appliance parts in volume
If you searched “wholesale appliance parts”, you’re probably not fixing one machine. You’re a repairer with a full run sheet, a property manager, a handyperson for a block of units, an installer, or maintenance for a caravan park or facility laundry. A wrong part means a second trip.
What matters at that volume is short. One supplier across brands, from a Hisense Front Load Washing Machine Door Seal HWFS8514E HWFS1015E to a Simpson dryer belt. Model numbers matched fast. Common wear parts from stock. Dispatch from Sydney the day you order when it’s in by 12pm Sydney time. If you buy for work, the trade account application is the place to start.
Common repair jobs and the wear parts they need
Each row pairs a common job with the part it usually needs and a real listing, matched by the model numbers in its title.
Front loader leaking from the door
Same leak, Fisher & Paykel WH front loader
Same leak, WH P3 and P4 models
Front loader not draining
Bosch front loader not draining
Top loader not filling
Samsung top loader not filling
Heat pump dryer runs but won’t tumble
Same fault, Esatto
Vented dryer squealing, or hot with weak airflow
Rumbling on spin
Same rumble, Haier
Stops mid-cycle with a motor fault
Dryer hums but won’t start
Motor sparking or weakFor the detail behind each row, see door seal, gasket, bellows or boot, which drain pump fits and which inlet valve fits. The full laundry range is in the washing machine parts store, and Fisher & Paykel parts have their own shelf.
How trade ordering works, step by step
- Photo the model sticker. Whoever is at the machine takes a clear photo of the whole sticker, not just the badge on the front.
- Search the model number on the site. Listing titles carry the model numbers each part suits, so the model is your search term. Find the exact part in 30 seconds shows the method.
- Several jobs? Send a list. Put the model numbers, and the part you think each needs, through the contact page and we’ll check them before you order.
- Get it in by 12pm Sydney time. Stocked parts are dispatched from Sydney’s Northern Beaches the day you order when it’s in by 12pm Sydney time, and delivered Australia-wide.
- Keep the photo with the job. The next call to that property starts with the model number already on file.
More on the mechanics: ordering appliance spare parts in Sydney and anywhere in Australia, and how online matching and delivery work.
How to match your model at volume
- Rebadged machines. The badge on the front isn’t always the platform inside, so match the sticker, not the logo. The Australian appliance rebadge map shows which brands share platforms.
- Suffixes. Copy every character. A WH1060S1 and a WH1060P4 look alike on a job sheet, yet they sit under two different door seal listings in the table above.
- Service numbers. Bosch and Siemens machines carry an E-Nr, often with an index after the slash, like the /01 in WAP28482AU/01. Westinghouse, Simpson, Electrolux and Dishlex machines carry a PNC beside the model. Record both.
The find any appliance model number guide shows where the sticker sits on washers, dryers, fridges and ovens, and the models directory lets you browse by brand.
What to carry in the van, and what to order per job
Order per job: anything matched to a model. Door seals, control boards and motor controllers, drain pumps that come with their housing, bearing kits and inlet valves with a particular outlet layout all belong here. Carried on spec, they tie up money in parts that may not suit the next machine.
Worth carrying: small items chosen by rating or size rather than model. Hose washers are the obvious one. Run capacitors go by microfarad rating, voltage and size, so fit one only where it matches the old one. Some belts carry a size code on the belt itself. Beyond that, build the van kit around the models you actually see.
Expensive parts: diagnose first, then order
Motor controllers, control boards, motors and spider kits are where a wrong guess costs real money, and boards are fitted after diagnosis. Before ordering a motor controller, read the fault code, check the supply and connectors, and test the motor and its wiring.
Rumbling on spin is either bearings or a cracked spider. The spider or bearings guide explains how to tell, and why repairers replace both when the drum is already out. On heat pump dryers, belts and pumps are fair game, but the sealed refrigerant side is licensed work.
Property managers: one trip, right part
The expensive part of a tenant’s broken washer is often the wasted visit. When the tenant logs the job, ask for three things: a photo of the model sticker, any code on the display, and a sentence on what the machine is doing. Pass them to your repairer before anyone is booked, so they can order first and arrive with the part.
Tell tenants where to look: inside the door rim on most front loaders, under the lid or on the back of top loaders, and on the door edge of dishwashers. Photos only; tenants shouldn’t open panels.
DIY or repairer?
For a maintenance handyperson, some jobs are reasonable with the machine unplugged: a hose, a belt, a door seal or a front loader drain pump. Others belong to a licensed person or a repairer with a meter: hard-wired 240V work, gas appliances, the sealed refrigerant side of fridges and heat pump dryers, and control boards. Capacitors can hold a charge after unplugging, so leave them to someone who knows how to discharge one safely. A repairer’s call-out typically runs $100–165 before parts; the appliance repair cost guide sets out the DIY-versus-tradie logic.
Opening a trade account
If you buy parts for work, apply through the trade account application page. What a trade account includes is handled through that application, not in articles like this one. Any listed part can be ordered on the site by model number in the meantime. Got a list of models to check first? Send it through the contact page.
Frequently asked questions
Do you sell wholesale appliance parts to the trade?
Businesses that buy parts for work can apply through the trade account application page, where trade accounts are handled. Anyone can order listed parts on the site by model number, dispatched from Sydney the day you order when it’s in by 12pm Sydney time.
Can I send a list of model numbers to check before ordering?
Yes. Send the full model numbers, including suffixes and any E-Nr or PNC, via the contact page, ideally with sticker photos. We’ll check the matches before you order, which saves wrong parts and second trips.
Which appliance brands can I order parts for?
The parts in this article cover Fisher & Paykel, Haier, Hisense, Samsung, Bosch, Simpson, Stirling and Esatto, and the models directory lists more by brand. Search the model number first. If it isn’t listed, send it via the contact page rather than guessing.
What parts should a repairer keep in the van?
Small items chosen by rating or size, such as hose washers, correctly rated run capacitors and belts identified by their size code. Model-specific parts like door seals, bearing kits and control boards are better ordered per job once the model number is confirmed.
How can property managers avoid a wasted call-out?
Ask the tenant for a photo of the model sticker and any error code when they report the fault. Your repairer can then match and order the part before the visit, so the first trip is the repair rather than an inspection.
How fast are parts dispatched?
Stocked parts are dispatched from Sydney’s Northern Beaches the day you order when it’s in by 12pm Sydney time. Delivery then runs Australia-wide, and transit time depends on where the job is.
Order by model, not by guess
Photograph the model sticker and search the model number on the site, or send your list via the contact page and we’ll check before you order. Parts are dispatched from Sydney’s Northern Beaches the day you order when it’s in by 12pm Sydney time. Buying for a business? Start with the trade account application.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
