Appliance Spares
Description
What this belt fixes on a dryer:
- the drum will not turn but the motor hums or runs
- clothes come out cold and not tumbled
- a squeal on start-up that rises with the cycle
Fits: see the model list below and check the model sticker on your appliance before ordering.
Replace it (about 30 minutes):
- Unplug the dryer and remove the front or top panel to reach the drum.
- Note how the old belt routes around the motor pulley and tensioner, then lift it off.
- Loop the new belt around the drum, ribbed side against the pulleys, and thread it through the tensioner and motor pulley.
- Turn the drum by hand two full turns to check the belt is centred, then refit the panel.
About This Part
The drive belt carries the motor’s rotation to the drum. When it stretches, frays or snaps, the motor runs but the drum won’t turn, you may hear squealing on startup, or smell hot rubber. A new belt restores the spin and tumble the machine had when new.
Fitting is a straightforward swap for most owners with basic hand tools — unplug the appliance first, and take a photo before disconnecting anything so reassembly is easy.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Belt |
|---|---|
| Fits Brand | Esatto |
| Appliance | Dryer |
| Part Numbers | EHPD80 |
| Dimensions | The belt has 7 Ribs, 11mm wide |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Drum not spinning or tumbling during a cycle
- Squealing or screeching noise during operation
- Burning rubber smell coming from the machine
- Drum spins freely by hand with no resistance
- Machine runs but clothes come out still wet
What’s In the Box
- 1 × Esatto belt (EHPD80)
Compatible Models
00203006516
The quickest check is the part number on your old belt or its label – if it reads EHPD80, this is the right part. Not sure? Send your model number via the contact form and we’ll match the correct part before you buy.
Frequently Asked Questions
Will this fit my Esatto dryer?
This is Esatto part EHPD80. The reliable check is the part number printed on your old part or on its label – if it reads EHPD80, this is the right belt. If there’s no number to be found, send us your appliance’s model number (it’s on the rating sticker) via the contact form and we’ll match the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2–7 business days depending on location.
How do I replace this belt?
Disconnect power. Remove the rear or side panel to access the belt. Loop the new belt around the drum and stretch it onto the motor pulley. Spin the drum by hand to ensure the belt tracks correctly before refitting the panel.
Browse more Esatto dryer parts.
