Appliance Spares
Description
What this belt fixes on a dryer:
- the drum will not turn but the motor hums or runs
- clothes come out cold and not tumbled
- a squeal on start-up that rises with the cycle
Fits: SHPD80W, SHPD80S, GGSHPD80W, STR-HPD80W. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (about 30 minutes):
- Unplug the dryer and remove the front or top panel to reach the drum.
- Note how the old belt routes around the motor pulley and tensioner, then lift it off.
- Loop the new belt around the drum, ribbed side against the pulleys, and thread it through the tensioner and motor pulley.
- Turn the drum by hand two full turns to check the belt is centred, then refit the panel.
About This Part
Drum drive belt for Stirling heat pump dryers, part number 2962470100, suiting the SHPD80W, SHPD80S, GGSHPD80W and STR-HPD80W. It is a 7-rib poly-vee belt, 11 mm wide with a 1,965 mm circumference.
When the belt stretches or snaps, the motor still runs but the drum stops turning, clothes come out cold and untumbled, and you may hear the motor spinning freely with no drum movement. A belt that squeals on startup is usually glazed and close to failure.
Fits models: SHPD80W, SHPD80S, GGSHPD80W, STR-HPD80W.
Check that the tension arm turns freely while the cabinet is open, as a seized tensioner shortens belt life.
Route the new belt around the drum and the motor pulley following the tensioner path, ribbed side against the pulleys. A step-by-step fitting guide is linked on this page.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Drain Pump |
|---|---|
| Fits Brand | Stirling |
| Appliance | Dryer |
| Part Numbers | 2962470100 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water left sitting in the drum after a cycle
- Cycle stops partway with a drain error
- Pump hums but moves no water
- Slow or noisy draining
What’s In the Box
- 1 × Stirling drain pump (2962470100)
Compatible Models
Fits 4 models across 3 series:
- GGSHPD: GGSHPD80W
- SHPD: SHPD80S, SHPD80W
- STR: STR-HPD80W
This drain pump fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this drain pump fit my Stirling dryer?
This drain pump is Stirling part number 2962470100 and fits the models listed on this page, including GGSHPD80W, SHPD80W, STR-HPD80W and SHPD80S. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this drain pump?
Disconnect power before beginning any repair. Remove the old drain pump, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Stirling appliance parts.
