
Quick answer: Simpson washers and dryers share their platforms with Westinghouse and Electrolux, so the parts are common and cheap: dryer belts and idler kits, washer inlet valves and water-level sensors, door locks, drain pumps. Belts sit in the $10–50 band, most washer parts in $25–60. Match the model number and the PNC on the sticker before you order; the PNC is what unlocks the right part for this family.
Simpson dryer belts and kits
The most-asked-for Simpson parts are dryer belts. Match your model to the family:
- Simpson Sirocco dryer fan belt, heavy duty (350 to 550 series)
- Simpson Maxidry dryer fan belt, heavy duty
- Simpson dryer fan belt — Minimax, Maxidry and Sirocco
- Simpson dryer belt, idler pulley and rear drum bearing kit (39S500M, 39S600M, 39P400M)
- Simpson Eziloader and Eziset idler pulley and drum belt
Fitting steps are in the dryer belt replacement guide; every other Simpson and Westinghouse part is in the Westinghouse spare parts guide.
Quick answer: Simpson washing machine parts are stocked in Australia and ship same-day — water inlet valves ($15.95–$34.85), drive belts ($14.99), lid switches, door interlocks, bearing kits and lid magnets for the Esprit, Eziset, Ezisensor and Enduro top loaders and the SWF front loaders. Simpson top loaders are among the most common washers in Australian homes, the faults are well understood, and nearly every one of them is a cheap part and a screwdriver away from fixed.
Find your Simpson part by model number
The great Australian top loader
Simpson has been the default Australian top loader for generations — Esprit, Eziset, Ezisensor, Enduro and Aquapulse machines are still working in laundries all over the country, and the SWF front loaders joined them later. Simpson is part of the Electrolux family, sharing its platform with Westinghouse and Electrolux machines, which is why so many parts are listed across all three brands. It also means the parts supply is deep: when a Simpson stops filling or won’t spin, the fix is almost always a known, inexpensive part we carry in stock and dispatch from Sydney.
What we stock for Simpson washers
| Part | Suits | Price |
|---|---|---|
Water inlet valve for Esprit / Eziset / Ezisensor | Esprit, Eziset and Ezisensor top loaders | $16.45 |
Eziset cold water dual inlet valve 119030810 | Eziset top loaders | $15.95 |
Dual inlet valve 132518600 | SWF12743, SWF12843, SWF10761 front loaders | $34.85 |
Motor drive belt M23 0198200006 | Simpson belt-drive top loaders | $14.99 |
Lid switch micro 360293G | Simpson top loaders | $12.95 |
Ezisensor door interlock switch 1240349-01/7 | Ezisensor top loaders | $29.45 |
Lip seal and bearings kit for SWF8025DQWA / SWF14743 | SWF front loaders | $53.95 |
On/off switch 0534300050 | Eziset 450, 500, 550, 605 | $9.95 |
Lid magnet 0626200003 | Simpson top loaders | $12.15 |
12uF motor capacitor | Simpson, Hoover and Westinghouse top loaders | $9.78 |
Can’t see your exact model? Browse every Simpson washing machine part we stock or run your model through the Part Finder.
Common Simpson faults and the part that fixes them
| Symptom | Part |
|---|---|
Fills slowly, trickles, or won’t fill at all | Inlet valve for Esprit / Eziset / Ezisensor · Eziset dual valve 119030810 |
Front loader won’t fill or fills on one side only | Dual inlet valve 132518600 |
Motor runs but the bowl or agitator won’t turn | Drive belt M23 0198200006 |
Won’t spin with the lid closed / doesn’t know the lid is shut | Lid switch 360293G · Lid magnet 0626200003 |
Ezisensor won’t start, lid locked light flashing | Door interlock switch 1240349-01/7 |
Front loader rumbles or roars on spin | Lip seal and bearings kit |
Motor hums but won’t start the drum | 12uF motor capacitor |
Completely dead, no lights | On/off switch 0534300050 |
Machine showing a fault code instead? Simpson shares its error codes with Westinghouse and Electrolux — they’re all decoded in our combined error code guide.
The inlet valve: the classic Simpson fix
If one part sums up Simpson repair, it’s the water inlet valve on the Esprit, Eziset and Ezisensor top loaders. The valve’s little solenoid works every single fill for years until the machine starts filling slowly, trickling, or not filling at all — and because the same valve suits all three ranges, it’s a very common replacement. At $16.45 for the valve and two hose connections plus a spade terminal to swap, it’s a genuine ten-minute fix — turn off the taps first.
How to find your Simpson model number
Check the model sticker: on top loaders it’s under the lid or on the rear of the console; on SWF front loaders it’s inside the door opening, on the door frame. Simpson models look like 36S502E, SWT5541 or SWF12743. Enter it in the Part Finder for the exact-fit part — and if the sticker is gone, our model number guide covers every hiding spot.
Frequently asked questions
Can you still get parts for Simpson washing machines?
Yes — inlet valves, belts, lid switches, interlocks, bearing kits, capacitors and switches for the Esprit, Eziset, Ezisensor, Enduro and Aquapulse top loaders and SWF front loaders, all in stock and shipped from Sydney.
My Simpson fills really slowly — what part do I need?
Almost always the water inlet valve. Check the tap filters for grit first; if they’re clean, replace the valve — it’s a ten-minute job on the Esprit, Eziset and Ezisensor machines.
My Simpson won’t spin but washes fine — why?
The machine thinks the lid is open. On most Simpson top loaders that’s the lid switch or the small magnet in the lid that triggers it — both are under $13.
Do Westinghouse parts fit Simpson machines?
Often, yes — Simpson, Westinghouse and Electrolux share platforms, and many parts are listed for all three brands. Match by your model number, not the badge.
Do Simpson parts ship same day?
Yes — order before 12pm Sydney time for same-day dispatch Australia-wide, flat $10.60 shipping.
Related
- Westinghouse, Simpson and Electrolux washing machine error codes
- Electrolux and Westinghouse parts Australia — common issues and spares
- Washing machine not spinning — diagnose the 6 causes
- All Simpson washing machine parts in stock
- Hard-to-find appliance brand parts in Australia
Ready to fix it?
- Run your model number through the Oz Appliance Spares Part Finder — model in, exact-fit part out.
- Browse 3,000+ parts in stock
- Order before 12pm Sydney time → ships same day from our Sydney Northern Beaches warehouse, Australia-wide.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
Appliance Spares













