One drain pump code is listed for Omega, Classique, Baumatic and Nouveau. The shared 674 part codes across this dishwasher group, and how to search by code not badge.
A dead dishwasher is usually the door lock switch: a ~$35 part and a two-screw swap, not a $200 call-out. Rule out the free stuff, then fix it yourself.
A repairer starts at $100-165 just to show up. The parts that fix most dishwashers cost $29-77 – here’s the repair-or-replace call by symptom.
Match your dishwasher’s model code to the element listed for it, and confirm it is the element at all before ordering — wet dishes are not always a heating fault.
Blanco dishwasher not drying or not heating = usually the heating element. How to confirm it safely and match the element to your model group.
An LG dishwasher showing OE — which can read as 0E on some displays — has a drain fault: it could not pump the water out within its time limit. The two most common causes are a clogged filter assembly in the base of the tub and a kinked or badly routed drain hose. Start by twisting out the filter se
An LG dishwasher showing IE — which reads as 1E on some displays — has a fill fault: it could not take in enough water within its time limit. The two most common causes are a water tap that is not fully open and a kinked or pinched inlet hose, with a blocked mesh filter at the hose connection close
Dishlex dishwasher parts in stock Australia-wide: drain pumps for DSF6105-DSF6306 and DX models from $25.95, inlet valves from $18.85. Same-day dispatch.
DishDrawer F1 means water in the base has tripped the flood sensor — the pump runs non-stop. How to drain the base, find the leak and fix it; parts from $24.85.
F&P dishwasher E3 (3 flashes on DishDrawer) means a water supply fault. Check tap, hose and pressure; replacement inlet valves from $16.55 in stock.
Appliance Spares