Appliance Spares
Description
About This Part
The timer steps the machine through each stage of the programme. A worn timer shows up as cycles that stall at the same point, a dial that stops advancing, or stages that never run. A new timer restores the full programme sequence.
Many owners fit this themselves; if you’d rather not, any local repairer can fit the part you supply.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Timer |
|---|---|
| Fits Brand | Haier |
| Appliance | Dryer |
| Part Numbers | H0034000653 DTM-1 |
| OZ Reference | 0233 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Machine won’t advance through its cycle stages
- Cycle runs indefinitely without stopping
- Machine skips certain cycle stages
- Knob turns but nothing happens
- Intermittent stopping during cycles
What’s In the Box
- 1 × Haier timer (H0034000653 DTM-1)
Compatible Models
HDY60M, HDY60M61416-A,
HDY-M40, HDY-M40
This timer fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this fit my Haier dryer?
This timer is Haier part number H0034000653 and fits the models listed on this page, including HDY60M61416-A. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 2pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2–7 business days depending on location.
How do I replace this timer?
Disconnect power. Pull off the timer knob, remove the control panel screws, and photograph the wiring connections before disconnecting. Swap the old timer for the new one, reconnect the wires in the same positions, and reassemble.
Browse more Haier dryer parts.
