Hisense Washing Machine Door Seal

Hisense Washing Machine Door Seal — Part K2315392

$89.95

Stops door leaks and musty smells on Hisense front loaders. Hisense door boot part K2315392. Same-day dispatch from Sydney’s Northern Beaches.

Find Your Part

Model-matched before you buy — check your model stickerSame-day dispatch on orders before 12pm Sydney timeShips from our Northern Beaches warehouse

Description

Replacement door seal (door boot gasket) for Hisense front load washing machines — Hisense part number K2315392. A torn, perished or permanently mould-stained boot is the usual reason a front loader leaks at the door, smells musty, or leaves black marks on washing. A new seal restores the watertight ring between the drum opening and the door glass.

Which machines use this seal

Hisense used more than one boot design across its front-loader range, and this listing is for part number K2315392 specifically. Match it against the part number moulded into your current seal, or confirm against your model sticker with the Part Finder before ordering. A second Hisense boot, part K2315391, is also stocked — the two are not interchangeable.

Fitting it

The boot is held by an outer retaining spring at the front panel and an inner clamp at the tub. Fitting means unplugging the machine, easing both off, seating the new boot with its locating mark at the top and working the springs back in evenly. Allow an unhurried 45–60 minutes with basic hand tools.

Frequently asked questions

Will this door seal fit my Hisense washing machine?

This is Hisense door boot part K2315392. The reliable check is the part number moulded into the rubber of your existing seal — fold the boot back and look for a 'K' followed by seven digits. If it reads K2315392, this is your seal. If it reads K2315391, order that seal instead — the two are not interchangeable. No number on the rubber? Run your model number through our Part Finder and we'll match the correct boot.

How quickly will it ship?

Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.

How long does replacing the door seal take?

Allow an unhurried 45-60 minutes with basic hand tools. The boot is held by an outer retaining spring at the front panel and an inner clamp at the tub: unplug the machine, ease both off, seat the new boot with its locating mark at the top and work the springs back in evenly.