Appliance Spares
Quick answer: Hoover washing machine parts are still stocked in Australia and ship same-day — drive belts ($10.85–$14.95), drain pumps ($19.95), inlet valves, pressure switches, lint filters and door interlocks, covering everything from the older Premier and Elite top loaders and twin tubs through to the DX-series front loaders. Many Hoover washers still working in Australian laundries are older machines, and that’s exactly why they’re worth fixing: the parts are simple, cheap and still available.
Find your Hoover part by model number
Old machine, easy fix
Plenty of Hoover washers in Australia have been running for a long time — Premier and Elite top loaders, twin tubs, and the L-series machines that just keep going. When one finally stops, the fault is usually a single worn part: a stretched belt, a tired inlet valve, a clogged lint filter. These machines were built simple, which makes them some of the easiest washers to repair yourself — most of the parts below fit with basic hand tools in under an hour. The newer DX-series front loaders are equally well covered, from inlet valves to pressure switches. We stock the lot and dispatch from Sydney.
What we stock for Hoover washers
| Part | Suits | Price |
|---|---|---|
 Drain pump 43585427 | 650L1AUS, 700L1AUS, 750L1AUS, 800RL | $19.95 |
 Drive belt M21 38528413 | 200M0AUS, 220M0AUS, 350M0AUS | $14.95 |
 Elite drive belt 38528405 | Hoover Elite 960 top loaders | $10.85 |
 Premier motor drive belt (M20) | Premier 4–5 kg top loaders | $14.95 |
 2-way inlet valve 41018989 | DXA47/1-AUS, DXC27/1-AUS, DXA175AH/1-AUS and related front loaders | $39.95 |
 Inlet valve for DXA47 / DXC27 / DXA175AH | DX-series front loaders | $39.85 |
 Pressure switch for DXOA175AH / DXOA385AH | DXOA-series front loaders | $37.95 |
 Door interlock switch for DXA47 / DXC27 | DX-series front loaders | $29.85 |
 Door handle for HV-LFL6 | HV-LFL6 front loaders | $39.95 |
 Premier lint filter 38784403 | Premier top loaders | $13.95 |
 Twin tub spin mat | Hoover twin tubs | $13.95 |
Can’t see your exact model? Browse every Hoover washing machine part we stock or run your model through the Part Finder.
Common Hoover faults and the part that fixes them
| Symptom | Part |
|---|---|
| Drum or agitator won’t turn, motor runs, sometimes a rubbery smell | Drive belt M21 38528413 · Elite belt 38528405 · Premier belt |
| Won’t drain, water left in the drum | Drain pump 43585427 |
| No fill, slow fill, or fills on only one tap | 2-way inlet valve 41018989 · DX-series inlet valve |
| Overfills, underfills or won’t start the wash | Pressure switch |
| Front loader dead with the door closed, or door light flashing | Door interlock switch |
| Lint over every load | Premier lint filter 38784403 |
| Twin tub spinner marking or snagging clothes | Twin tub spin mat |
Is an older Hoover worth repairing?
Almost always, if the drum and motor are sound. The parts that stop these machines — belts, valves, filters, switches — are all in the $10–$40 range, and the mechanical simplicity means there’s very little else to go wrong. A machine that has already run for decades on its original belt says everything about how long the next belt will last. Compare a $14.95 belt against replacing the whole machine, and the maths does itself.
How to find your Hoover model number
Check the model sticker: on top loaders and twin tubs it’s usually on the rear panel or under the lid; on the DX-series front loaders it’s inside the door opening, on the door frame. Hoover Australia model codes look like 550, 800RL, 200M0AUS or DXA47/1-AUS. Enter it in the Part Finder for the exact-fit part — and if the sticker has worn away, our model number guide shows where else to look.
Frequently asked questions
Can you still get parts for old Hoover washing machines in Australia?
Yes — belts, pumps, valves, filters, switches and hoses for the Premier, Elite and L-series top loaders, twin tubs and the DX-series front loaders, all in stock and shipped from Sydney.
My Hoover fills but the drum won’t turn — what’s wrong?
On these top loaders that’s the classic belt symptom. The motor spins, the belt slips or has snapped, and nothing else moves. It’s a $10–$15 part and one of the easiest fixes on the machine.
My old Hoover is leaving lint on everything — is it worn out?
Usually it’s just the lint filter — the mesh splits or clogs with age. It’s a $13.95 clip-in part on the Premier machines.
Where is the model number on a Hoover washer?
On the model sticker — rear panel or under the lid on top loaders, inside the door frame on front loaders. Pop it into the Part Finder.
Do Hoover parts ship same day?
Yes — order before 12pm Sydney time for same-day dispatch Australia-wide, flat $10.60 shipping.
Related
- Hard-to-find and discontinued appliance brand parts in Australia
- How to replace a washing machine drive belt (front and top loader)
- Washing machine won’t drain? The free 10-minute check
- All Hoover washing machine parts in stock
- Find your exact part with the Part Finder
Ready to fix it?
- Run your model number through the Oz Appliance Spares Part Finder — model in, exact-fit part out.
- Browse 3,000+ parts in stock
- Order before 12pm Sydney time → ships same day from our Sydney Northern Beaches warehouse, Australia-wide.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
