Not 100% sure it fits? Match your model number in 30 seconds →

Esatto Heat Pump Dryer Drum Drive Belt EHPD7

$19.95

Genuine-fit drive belt for Esatto heat pump dryers (models EHPD7). Drive belt links the motor to the drum. Ready to ship across Australia.

Fits models: EHPD7
Same-day dispatch on orders placed before 12pm (Sydney time) on business days.
Not sure it fits? Send us your model number and we'll confirm.
Find Your Part
Model-matched before you buy — check your model stickerSame-day dispatch on orders before 12pm Sydney timeShips from our Northern Beaches warehouse
Categories: , , ,

Description


What this belt fixes on a dryer:

  • the drum will not turn but the motor hums or runs
  • clothes come out cold and not tumbled
  • a squeal on start-up that rises with the cycle

Fits: see the model list below and check the model sticker on your appliance before ordering.

Replace it (about 30 minutes):

  1. Unplug the dryer and remove the front or top panel to reach the drum.
  2. Note how the old belt routes around the motor pulley and tensioner, then lift it off.
  3. Loop the new belt around the drum, ribbed side against the pulleys, and thread it through the tensioner and motor pulley.
  4. Turn the drum by hand two full turns to check the belt is centred, then refit the panel.

About This Part

The drive belt carries the motor’s rotation to the drum. When it stretches, frays or snaps, the motor runs but the drum won’t turn, you may hear squealing on startup, or smell hot rubber. A new belt restores the spin and tumble the machine had when new.

Fitting is a straightforward swap for most owners with basic hand tools — unplug the appliance first, and take a photo before disconnecting anything so reassembly is easy.

  • In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
  • $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
  • 12-month warranty on every part we sell

Specifications

Part TypeDrive Belt
Fits BrandEsatto
ApplianceDryer
Part Numbers2962470100
ConditionBrand new
Warranty12 months

Signs You Need This Part

  • Motor runs but the drum won’t turn
  • Squealing on startup
  • Smell of hot rubber
  • Belt visibly stretched, frayed or snapped

What’s In the Box

  • 1 × Esatto drive belt (2962470100)

Compatible Models

Fits 1 models across 1 series:

  • EHPD: EHPD7

This drive belt fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.

Frequently Asked Questions

Will this drive belt fit my Esatto dryer?

This drive belt is Esatto part number 2962470100 and fits the models listed on this page, including EHPD7. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.

How quickly will it ship?

Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.

How do I replace this drive belt?

Disconnect power before beginning any repair. Remove the old drive belt, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.

Browse more Esatto appliance parts.

Frequently asked questions

Will this drive belt fit my Esatto dryer?
This drive belt is Esatto part number 2962470100 and fits the models listed on this page, including EHPD7. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this drive belt?
Disconnect power before beginning any repair. Remove the old drive belt, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.

Complete the repair

Other Esatto parts our customers order with this repair: