Quick answer: SmartDrive — Fisher & Paykel’s belt-less, gearbox-less direct-drive washing machine — fails in five recognisable ways: suspension rods worn (drum bangs), rotor magnets unglued (slap-slap-slap on spin), drain pump dead (won’t drain), inlet valve coil dead (won’t fill / F1), and pressure sensor drift (fills, times out, F1). All five are fixable with…
Quick answer: Westinghouse ovens have their model sticker in one of three places: on the oven door frame (open the door, look at the lower lip), on the side wall of the cavity (visible with the door open), or on a plate behind the storage drawer / kick panel at the base. Cooktops have it…
Quick answer: Every Fisher & Paykel appliance has its model number on a printed sticker in one of three places — inside the door / lid, on the back panel, or inside the detergent drawer / kick panel. On a F&P washer it’s usually under the lid (top-loader) or inside the door rim (front-loader). On…
Quick answer: Every appliance has a printed data plate with its model and serial number. Washers — inside the door rim, behind the detergent drawer, or on the back panel. Dryers — inside the door rim or on the back. Fridges — inside the fridge compartment, behind the crisper, or on the top interior frame.…
Homemaker, Centix, Everdure, Stirling, Omega, Blanco — many are Midea inside, and the parts exist. Dishwasher valves and elements, washer belts and hoses, matched by model number.
WMD107 combo door locks and valves, TL-series lint filters and more, stocked in Sydney. Including the split lint filter that gets blamed on detergent for months.
Door locks, hinges, inlet valves, pressure sensors and belts for Seiki SC-series washers and combos — in stock in Sydney. Budget machines have the best repair maths of all.
Ice wall in the freezer, warm fridge, full recovery after a manual thaw: that loop is the defrost timer. Timer vs heater vs bi-metal thermostat, the 30-minute swap, parts in stock in Sydney.
Vented dryers wall-mount with the right bracket kit; heat pump and condenser dryers never can. Stud rules, inverted mounting, venting at face height, and the bracket kits in stock.
Fill the rinse aid first — it is the cause in most homes. Then the element and vent checks that separate cold-wet from hot-wet dishes, and which parts fix each.
Appliance Spares