An induction cooktop that won’t heat is almost always caused by one of three things: incompatible cookware (not magnetic enough), a single failed zone (induction coil or board fault for that zone), or a completely dead cooktop (main induction control board failure). Start with the fridge magnet test
The E0 code (or flashing –) on an induction cooktop means the zone cannot detect suitable cookware. The pan base is either not magnetic, too small for the zone, off-centre, or severely warped. Place a fridge magnet on the base of your pan — if it falls off or barely clings, the cookware is th
Quick answer: Westinghouse ovens have their model sticker in one of three places: on the oven door frame (open the door, look at the lower lip), on the side wall of the cavity (visible with the door open), or on a plate behind the storage drawer / kick panel at the base. Cooktops have it…
Appliance Spares