Appliance Spares
Description
What this door seal fixes on a washing machine:
- water leaking from the bottom of the door during the wash or spin
- black mould or a split in the rubber lip that will not clean off
- a musty smell or grey marks left on washing
Fits: HWFL1014V, HWFE1014VA. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (45 to 90 minutes):
- Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
- Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
- Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
- Run a short rinse cycle empty and check for drips before you load it.
Guide: Hisense HWFL1014V Washing Machine Parts — Common Faults and Fixes (Australia 2026)
About This Part
Door gasket seal for Hisense 10 kg front load washing machines HWFL1014V and HWFE1014VA. The gasket closes the gap between the door glass and the outer tub; a failed one announces itself with water tracking down the front panel mid-wash, splits or bubbling in the rubber, and mould that cleaning cannot lift.
Fits models: HWFL1014V, HWFE1014VA.
Warming the new seal in water before fitting makes it easier to seat, and the clamp bands need only a screwdriver.
These two 10 kg machines are documented against the same seal. Other 10 kg Hisense models, such as the HWFY1014 and HWFS1015E, take different seals with their own listings, so match the letter block after HWF exactly against the sticker inside the door rim before ordering. Supplied new.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Door Seal |
|---|---|
| Fits Brand | Hisense |
| Appliance | Washing Machine |
| Part Numbers | See listing |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water on the floor mid-cycle
- Musty smell or mould on the seal
- Black marks appearing on clean loads
- Visible splits, tears or perished rubber
What’s In the Box
- 1 × Hisense door seal
Compatible Models
Fits 2 models across 2 series:
- HWFE: HWFE1014VA
- HWFL: HWFL1014V HWFE1014VA
This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this door seal fit my Hisense washing machine?
This Hisense door seal fits the models listed on this page, including HWFE1014VA and HWFL1014V HWFE1014VA. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Hisense appliance parts.
