Appliance Spares
Description
What this door seal fixes on a washing machine:
- water leaking from the bottom of the door during the wash or spin
- black mould or a split in the rubber lip that will not clean off
- a musty smell or grey marks left on washing
Fits: HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (45 to 90 minutes):
- Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
- Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
- Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
- Run a short rinse cycle empty and check for drips before you load it.
Guide: Washing Machine Door Seal Replacement — Complete Guide (Australia)
About This Part
Replacement door seal for Haier HWF-series front load washing machines, sold against the HWF75AW3, HWF85ANB1 and HWF95ANB1 group. The bellows gasket is the machine’s main water barrier at the door; failure starts as a slow seep under the door and ends with standing water mid-wash, usually alongside black mould embedded in the folds that no cleaner shifts.
Fits models: HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1.
Water marks on the floor that appear only on wash days are the usual early clue.
Overlapping Haier seal listings exist in this range, so match the exact letter block in your model code (AW3, AN1 or ANB1) from the sticker inside the door opening before choosing, or send the code through the contact form for a check. Supplied new with a 12-month warranty.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Door Seal |
|---|---|
| Fits Brand | Haier |
| Appliance | Washing Machine |
| Part Numbers | 126231247961 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water on the floor mid-cycle
- Musty smell or mould on the seal
- Black marks appearing on clean loads
- Visible splits, tears or perished rubber
What’s In the Box
- 1 × Haier door seal
Compatible Models
Fits 5 models across 1 series:
- HWF: HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1
This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this door seal fit my Haier washing machine?
This Haier door seal fits the models listed on this page, including HWF75AW3, HWF85AN1, HWF85ANB1 and HWF95AN1. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Haier appliance parts.
