Not 100% sure it fits? Match your model number in 30 seconds →

Haier Washing Machine Door Seal HWF75AW1/AW2/DW1 & 20 More

Fits these modelsHWF85AW1HWF75AW1HWF80BW1HWF75AW2HWF75DW1HWF85DW1
+17 moreHWF90BW1HWF70BW1WH7560P1WH7560J1WH8560P1WH8560J1WH8560P2WH7560P2WH8560J2WH7560J3WH9060J3WH8060J3WH8060P1WH8060P2WH7560J2WH8560J3WH2424F1
Different model? Check yours with the Part Finder

$42.95

(1 customer review)

Haier door seal gasket H0020300590D for HWF75AW1, HWF75AW2, HWF75DW1, HWF80BW1, HWF85AW1, HWF90BW1 and related models. Replaces a split or mould-marked boot behind door leaks; also catalogued against Fisher & Paykel WH-series.

Fits models: HWF70BW1, HWF75AW1, HWF75AW2, HWF75DW1, HWF80BW1, HWF85AW1, HWF85DW1, HWF90BW1, WH7560J1, WH7560J3, WH7560P1, WH7560P2, WH8560J1, WH8560J2, WH8560P1, WH8560P2, HWF80BW2
Same-day dispatch on orders placed before 12pm (Sydney time) on business days.
Not sure it fits? Send us your model number and we'll confirm.
All compatible models (24)
HWF85AW1HWF75AW1HWF80BW1HWF75AW2HWF75DW1HWF85DW1HWF90BW1HWF70BW1WH7560P1WH7560J1WH8560P1WH8560J1WH8560P2WH7560P2WH8560J2WH7560J3WH9060J3WH8060J3WH8060P1WH8060P2WH7560J2WH8560J3WH2424F1HWF80BW2

Model numbers are on the model sticker — usually inside the door frame or on the back panel. Not sure? Use the Part Finder or send the sticker photo to us on WhatsApp.

Find Your Part
Model-matched before you buy — check your model stickerSame-day dispatch on orders before 12pm Sydney timeShips from our Northern Beaches warehouse

Description


What this door seal fixes on a washing machine:

  • water leaking from the bottom of the door during the wash or spin
  • black mould or a split in the rubber lip that will not clean off
  • a musty smell or grey marks left on washing

Fits: HWF75AW1 (61381-A), HWF75AW2 (61396-A), HWF75DW1 (61399-A), HWF80BW1 (61382-A), HWF80BW2 (61398-A), HWF85AW1 (61380-A), HWF85DW1 (62300-A), HWF90BW1 (62341-A), HWF70BW1. Check the model number on the sticker inside the door or on the back before ordering.

Replace it (45 to 90 minutes):

  1. Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
  2. Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
  3. Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
  4. Run a short rinse cycle empty and check for drips before you load it.

Guide: Washing Machine Door Seal Leaking? 7 Causes & Fixes

About This Part

Haier front load washing machine door seal gasket, part number H0020300590D, covering the HWF75, HWF80, HWF85 and HWF90 machines in AW, BW and DW versions. This is the drum-to-door bellows seal; once the rubber splits or the folds hold mould, water marks the floor during wash and the machine smells damp between uses.

Fits models: HWF75AW1 (61381-A), HWF75AW2 (61396-A), HWF75DW1 (61399-A), HWF80BW1 (61382-A), HWF80BW2 (61398-A), HWF85AW1 (61380-A), HWF85DW1 (62300-A), HWF90BW1 (62341-A), HWF70BW1.

If your Haier code is not listed, send it through the contact form and we will check the part.

Bracketed numbers are Haier product codes from the door sticker; match either the model or the code. The same part number is also catalogued against Fisher & Paykel WH7560 to WH9060 front loaders, which are covered by a separate listing. Supplied new.

Doing the full service? The Haier HWF75AW1 Washing Machine Drum Overhaul Kit (Bearings, Belt, Door Seal) bundles this part with the other common wear points for this machine.

  • In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
  • $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
  • 12-month warranty on every part we sell

Specifications

Part TypeDoor Seal
Fits BrandHaier
ApplianceWashing Machine
Part NumbersH0020300590D
ConditionBrand new
Warranty12 months

Signs You Need This Part

  • Water on the floor mid-cycle
  • Musty smell or mould on the seal
  • Black marks appearing on clean loads
  • Visible splits, tears or perished rubber

What’s In the Box

  • 1 × Haier door seal (H0020300590D)

Compatible Models

Fits 17 models across 2 series:

  • HWF: HWF70BW1, HWF75AW1, HWF75AW2, HWF75DW1, HWF80BW1, HWF80BW2, HWF85AW1, HWF85DW1, HWF90BW1
  • WH: WH7560J1, WH7560J3, WH7560P1, WH7560P2, WH8560J1, WH8560J2, WH8560P1, WH8560P2

This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.

Frequently Asked Questions

Will this door seal fit my Haier washing machine?

This door seal is Haier part number H0020300590D and fits the models listed on this page, including HWF70BW1, HWF75AW1, HWF75AW2 and HWF75DW1. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.

How quickly will it ship?

Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.

How do I replace this door seal?

Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.

Browse more Haier appliance parts.

Additional information

Weight1.2 kg
Dimensions40 × 35 × 8 cm

1 review for Haier Washing Machine Door Seal HWF75AW1/AW2/DW1 & 20 More

  1. Vance

    Prompt service, very fast delivery, thank you. Fits my Haier washing machine, cheers mate

Add a review

Your email address will not be published. Required fields are marked *

Post comment

Frequently asked questions

Will this door seal fit my Haier washing machine?
This door seal is Haier part number H0020300590D and fits the models listed on this page, including HWF70BW1, HWF75AW1, HWF75AW2 and HWF75DW1. Find your model number on the appliance's rating sticker and match it against the list. If your model isn't listed, send us the model number and we'll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.

Complete the repair

Most repairers replace these together while the machine is apart: