Appliance Spares
Description
What this door seal fixes on a washing machine:
- water leaking from the bottom of the door during the wash or spin
- black mould or a split in the rubber lip that will not clean off
- a musty smell or grey marks left on washing
Fits: WH7560J1, WH7560J2, WH7560J3, WH7560P1, WH7560P2, WH8060P1, WH8060P2, WH8560P1, WH8560P2, WH8560J1, WH8560J2, WH8560J3. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (45 to 90 minutes):
- Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
- Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
- Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
- Run a short rinse cycle empty and check for drips before you load it.
About This Part
Fisher & Paykel front load washing machine door seal gasket, part number H0020300590D, for the WH7560, WH8060 and WH8560 series in both J and P variants. The gasket seals the door glass against the outer tub; failure shows as water leaking below the door mid-cycle, perished or split folds, and mould that returns after cleaning.
Fits models: WH7560J1, WH7560J2, WH7560J3, WH7560P1, WH7560P2, WH8060P1, WH8060P2, WH8560P1, WH8560P2, WH8560J1, WH8560J2, WH8560J3.
Water under the machine after the final rinse, without drips at the hose connections, usually traces back to this gasket.
That is twelve documented Fisher & Paykel models. The same part number is also catalogued against Haier HWF-series front loaders; that separate listing carries the Haier model detail. Confirm your model code on the sticker inside the door opening before ordering.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Door Seal |
|---|---|
| Fits Brand | Fisher & Paykel |
| Appliance | Washing Machine |
| Part Numbers | H0020300590D |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water on the floor mid-cycle
- Musty smell or mould on the seal
- Black marks appearing on clean loads
- Visible splits, tears or perished rubber
What’s In the Box
- 1 × Fisher & Paykel door seal (H0020300590D)
Compatible Models
Fits 12 models across 1 series:
- WH: WH7560J1, WH7560J2, WH7560J3 WH7560P1, WH7560P1, WH7560P2, WH8060P1, WH8060P2 WH8560P1, WH8560J1, WH8560J2, WH8560J3, WH8560P1, WH8560P2
This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this door seal fit my Fisher & Paykel washing machine?
This door seal is Fisher & Paykel part number H0020300590D and fits the models listed on this page, including WH7560J1, WH7560J2, WH7560P1 and WH7560P2. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Fisher & Paykel appliance parts.
