Appliance Spares
Description
What this drain pump fixes on a washing machine:
- water left in the drum at the end of the cycle
- the machine stops before spin or shows a drain fault
- a humming or grinding noise from the bottom of the machine with no water moving
Fits: see the model list below and check the model sticker on your appliance before ordering.
Replace it (30 to 60 minutes):
- Unplug the machine, drain it through the emergency hose and open the filter cover.
- Remove the kick panel, photograph the wiring, then unplug the pump connector.
- Release the pump from the housing or hoses, fit the new pump and reconnect the wiring and hoses.
- Refit the filter and run a rinse cycle to check it drains and does not leak.
About This Part
The drain pump pushes used water out of the machine at the end of each wash and spin stage. When it fails or jams you’ll typically find water still sitting in the drum, cycles stopping partway with a drain error, or a humming pump that moves no water. A working pump gets cycles finishing properly again.
Many owners fit this themselves; if you’d rather not, any local repairer can fit the part you supply.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Drain Pump |
|---|---|
| Fits Brand | Fisher & Paykel |
| Appliance | Washing Machine |
| Part Numbers | H0034000110D |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water left sitting in the drum after a cycle
- Cycle stops partway with a drain error
- Pump hums but moves no water
- Slow or noisy draining
What’s In the Box
- 1 × Fisher & Paykel drain pump (H0034000110D)
Compatible Models
The quickest check is the part number on your old drain pump or its label – if it reads H0034000110D, this is the right part. Not sure? Send your model number via the contact form and we’ll match the correct part before you buy.
Frequently Asked Questions
Will this drain pump fit my Fisher & Paykel washing machine?
This is Fisher & Paykel part H0034000110D. The reliable check is the part number printed on your old part or on its label – if it reads H0034000110D, this is the right drain pump. If there's no number to be found, send us your appliance's model number (it's on the rating sticker) via the contact form and we'll match the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this drain pump?
Disconnect power before beginning any repair. Remove the old drain pump, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Fisher & Paykel appliance parts.
