Appliance Spares
Quick answer: A Fisher & Paykel dryer door that sags, grinds or will not stay shut almost always has a worn or cracked door hinge plate — the door itself is rarely the problem. The fix is a new plate matched to the code on your model sticker, which sits around the rim of the door opening and reads like DE6060M1. It is a screwdriver job of about twenty minutes. The table below matches the common Australian model codes to the right plate.
Last updated August 2026
Why the hinge plate is the part that gives
A dryer door is a cantilever: its whole weight hangs off the hinge plate, and every open and close levers against the screws holding that plate to the front panel. Add the heat cycling of every load and the plate or its mounting points slowly fatigue. The first sign is usually a door that drops slightly as it swings open. Then the latch stops lining up with its catch, and eventually the door pops open mid-cycle and the drum stops dead — the door switch cuts the motor the moment the door is not shut.
People replace catches for this and are disappointed. If the door visibly drops when you open it, the catch is fine — the hinge is letting the whole door ride low.
17 distinct catalogued parts are listed for both Fisher & Paykel and Haier appliances. The two brands share manufacturing platforms, and this hinge plate is one of the clean examples — the same plate is catalogued under both names.
Match the plate to your model code
Open the door and read the model sticker around the rim of the door opening; the back panel usually carries one as well. Then match the code:
| Your model code | The hinge plate to order |
|---|---|
 DE7060G2, DE7060M2, DE7060P1, DE7060P2 | Fisher & Paykel dryer hinge plate for DE7060G2, DE7060M2, DE7060P1 and DE7060P2 |
 DE6060G1, DE6060M1, DE6060M2, DE6060P1 | Fisher & Paykel dryer hinge plate for DE6060G1, DE6060M1, DE6060M2 and DE6060P1 |
 DE5060M1, DE5060M2, DE5060MU1, DE5060MU2, DE6060G1 | Fisher & Paykel dryer hinge plate for DE5060M1, DE5060M2, DE5060MU1 and DE5060MU2 |
 DE4060M1, DE4560M1, DE4560M2, DE5060G1 | Fisher & Paykel dryer hinge plate for DE4060M1, DE4560M1, DE4560M2 and DE5060G1 |
 Models matched by part number H0180100122 | Fisher & Paykel dryer door hinge plate sold by part number |
Two details worth pausing on. DE6060G1 appears on two of those listings — it is catalogued against both, so if that is your model, send us the code and we will confirm the match before you order. And read every code to the last character: DE5060M1 and DE5060MU1 sit one letter apart, and the letters decide fitment.
The plate two catalogues share: H0180100122
Fisher & Paykel and Haier dryers overlap heavily under the skin. If you have matched your machine by part number rather than model code — from a service sheet, or a number moulded into the old plate — the Fisher & Paykel and Haier dryer hinge plate is the same part under its combined listing. The hinge is not the only crossover, either: the dryer heater fitment guide for Fisher & Paykel and Haier maps another shared part across the same platforms.
If you want to double-check your machine before ordering, Fisher & Paykel publishes manuals and documentation for current and older models on its Australian site.
Hinge or catch? Thirty seconds to be sure
Hold the door half-open and lift it gently by the outer edge. Movement at the hinge — visible flex, a clunk, the door rising a few millimetres — means the hinge plate or its mounts have gone. If the door feels solid on its hinge but springs back open when you shut it, the catch and striker are the wear item instead; that pattern is the one covered in the Simpson dryer door catch and striker guide, though the parts differ by brand. Keep in mind a sagging hinge often drags the catch out of alignment as well, so re-check the catch after the new plate goes in, not before.
Fitting the new plate
- Unplug the dryer. If it sits on a wall bracket, take it down for this job — working overhead against screw torque is how doors get dropped.
- Open the door fully and take its weight in one hand. Remove the screws holding the hinge plate to the cabinet, then lift the door clear with the plate still attached.
- On a bench or towel, unscrew the old plate from the door and fit the new one. Reuse the screws unless the heads are chewed or the threads stripped.
- Offer the door back up to the cabinet, start every screw by hand before tightening any, then snug them down evenly. Cracked mounting bosses mostly come from one screw driven home while the plate sits crooked.
- Close the door and watch the latch meet the catch — it should engage with a positive click, without lifting or pushing down on the door. Run a short cycle and open the door once mid-cycle: the drum should stop the moment it opens.
DIY or a tradie?
This is one of the friendlier dryer jobs: no wiring, no teardown, a light part, and every step reversible. Do it yourself unless the cabinet itself has cracked around the hinge mounts — spreading load into damaged plastic is the kind of repair that keeps coming back, and a tradie can tell you whether the panel will hold a new plate or the machine needs more than a hinge.
Frequently asked questions
Where is the model number on a Fisher & Paykel dryer?
Open the door and look for the model sticker around the rim of the door opening; there is usually a second sticker on the back panel. The code reads like DE6060M1 or DE7060P2 — photograph it, suffix and all, before you order.
My dryer stops mid-cycle and I find the door ajar. Is that the hinge?
Very likely. A sagged hinge lets the latch ride below its catch, the door drifts open under drum vibration, and the door switch cuts the motor the instant it does. Fix the hinge before assuming the machine has an electrical fault.
One listing says Haier as well as Fisher & Paykel. Is it the same part?
Yes. The two brands share platforms, and this plate carries the same part number in both catalogues — the table above shows it. Either listing gets you the identical plate.
The door still will not stay shut after the new hinge plate. What next?
Check the catch and striker for wear, and check the door seal is not holding the door proud of the cabinet. If the machine is also flashing a fault, the Fisher & Paykel dryer error codes guide will tell you whether the code is door-related.
Do I need new screws?
Reuse the originals unless they are chewed or stripped. Do not substitute longer screws for extra bite — behind that panel is drum clearance, and a screw tip in the wrong place announces itself on the first load.
My model code is not in the table. What now?
Do not buy on looks — hinge plates across the range are close cousins, and the differences are in screw spacing and depth. Send us the code from the model sticker, plus a photo of the old plate if it has a number moulded in, and we will confirm the match.
Get the right plate first time
Photograph the model sticker and run the code through the part finder, or send us the code with a photo of the old plate and we will confirm the part before you order. Same-day dispatch from Sydney’s Northern Beaches on orders placed before 12pm — a sagging door does not have to wait for the weekend.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
