Appliance Spares
Quick answer: A Hisense washing machine door hinge (door hinge assembly) carries the weight of the door and keeps it square to the seal and the lock. The first sign of failure is usually this: the door has dropped and rubs the front panel or the seal. Replacement door hinges for Hisense washing machines run about $50–70; a hinge is a mid-priced part and saves a seal and a lock. Match the full model number on your Hisense sticker (HCF7S1014B, HWF3S8514, HWFE1014VA, HWFL1014V and more) against the listing title before you order.
- Hisense Washing Machine Door Hinge HWF3S8514 HWFS1015AB HWFS1015E HWFS1214PBIn stock · Sydney warehouseView part
- Hisense Washing Machine Door Lock Interlock Switch HWF5S1214 HWF3S8514 HWF8I1015BIn stock · Sydney warehouseView part
- Hisense Washing Machine Door Lock Interlock Switch HWFL1014V, HWFE1014VAIn stock · Sydney warehouseView part
Fit check: the model number on your sticker must appear in the listing title — the badge on the front is not enough. All washing machine parts · Not listed? Send us the model number and we match it before you pay.
Last updated October 2026
What the door hinge does on a Hisense washing machine
The door hinge carries the weight of the door and keeps it square to the seal and the lock. On Hisense washing machines sold in Australia the same part is shared across model families, which is why one listing covers several model numbers, and why two door hinges that look alike are not interchangeable: the plate shape, the pin and the screw spacing differ between families. The full model number on your sticker settles it.
Pull the plug, and support the door before the last screw comes out.
Symptoms of a failed Hisense door hinge
| What you see | What it usually means |
|---|---|
| The door has dropped and rubs the front panel or the seal | The hinge pin or bush has worn |
| The door will not click shut, or needs lifting to lock | The door is sitting low so the latch misses the lock |
| A crack in the hinge plate or play when you lift the door | The hinge is breaking up |
| Leaks at the top of the seal after a door knock | The door is no longer pressing evenly on the seal |
Is it really the door hinge?
A door that will not lock is more often a worn lock than a hinge. Lift the open door gently: if it moves up and down more than a millimetre or two, the hinge is worn. If it is solid and square, look at the lock and the latch instead.
Where is the model sticker on a Hisense washing machine
Inside the door opening, on the rim, or behind the detergent drawer. Write the full code down, letters and numbers, or photograph it: the suffix matters, and the badge on the front of the machine is not enough. Our Hisense model number guide has photos of each spot.
Which Hisense door hinge is listed for your model
One row per model number as it appears on the sticker. The part column is the listing title, which names every model that listing covers.
HCF7S1014B
HWF3S8514
HWFE1014VAModel not in the table? Send us the full model number and we check the door hinge against it before you pay.
Before you order a Hisense door hinge
Hinges are handed and sized to the door: a left-hung and a right-hung door take mirror-image hinges, and sibling models can differ in the plate shape, the pin diameter and the screw spacing even when the doors look the same. Note which side your door opens from, match the full model number on your sticker against the listing title, and compare the listing photo with the old hinge for the number of screw holes on each plate. Some listings are the hinge alone and some include the bushes and the pin; if the old pin is worn you want the set. If your model is not in any title, send us the number and a photo of the old hinge before you order.
Replacing the door hinge: the job in order
- Pull the plug and open the door.
- Support the door and undo the hinge screws on the cabinet side; the door comes away with the hinge.
- Lay the door glass-down on a towel and undo the screws holding the hinge to the door.
- Install the new hinge to the door, then offer the door up and install the cabinet screws loosely.
- Close the door and check it sits square to the seal and clicks into the lock, then tighten.
- Run a short cycle and check the seal for leaks.
DIY or a repairer?
For most people this is a DIY job: a hinge is a mid-priced part and saves a seal and a lock. A repairer’s call-out in Australia is in the $100–165 band before the part, so the saving is the labour. Use a licensed repairer if the appliance is hard-wired, if you find burnt or melted wiring, if gas or sealed refrigerant is involved, or if the new part does not cure the fault, because the next suspect is usually the control board and that is fitted after diagnosis, not before.
Frequently asked questions
The door is sagging and the lock will not catch. Hinge first or lock first?
Hinge first. A dropped door puts sideways load on the lock pin and many locks fail soon after, but a new lock on a sagging door fails again. Install the hinge, check the door sits square, and only then test the lock.
Is the hinge the same across the range?
No. Hinges differ in the plate shape and screw spacing. Match the full model number on your sticker against the listing title.
Do I need a repairer?
No. It is screws and a heavy door; a helper to hold the door makes it easy.
Can I just tighten the old hinge?
Try it. If the screws were loose, that may be the whole fix. If the pin or bush is worn, tightening does nothing.
Why did it wear?
Leaning on the open door and loading with a knee on it. Treat the door as a door, not a shelf.
The door glass has a chip near the hinge. Does that matter?
Yes. A chipped door glass is a crack waiting to happen on a hot cycle. Check whether the chip is in the glass or in the plastic door frame; a frame chip is cosmetic, a glass chip means the door assembly is due as well.
How fast does a Hisense door hinge arrive?
Parts in stock in Sydney are dispatched the day you order when it’s in by 12pm Sydney time, with $10.60 flat delivery Australia-wide and free delivery over $149. Most of Australia sees the part within a few business days.
Get the right door hinge first time
Photograph the sticker, match the full model number against the listing title, and if anything is unclear send us the code. In stock in Sydney and dispatched the day you order when it’s in by 12pm Sydney time. Browse all washing machine parts or the brand shelves.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
