
Quick answer: Esatto washing machine parts are stocked in Australia and ship same-day — door seals ($79–$90), lint filters (~$22), door interlocks, inlet valves and pressure sensors for the EFLW front loaders and ETLW top loaders. Esatto is a budget brand with no official parts service, but the machines run on shared OEM platforms, so the spares are standard parts — most are a quick, inexpensive DIY fix once you match your EFLW or ETLW model.
Find your Esatto part by model number
No parts counter behind the brand
Esatto sells well-priced washers through online and clearance channels, but there’s no service network or spare-parts desk once the warranty ends. So a simple fault — a split door seal, a clogged lint filter, a tired inlet valve — leaves owners with a dead-end search and a working machine they’re told to replace. It almost never needs replacing. We stock the parts and dispatch from Sydney.
Common Esatto faults and the part that fixes them
| Symptom | Part |
|---|---|
Leaking from the door during a wash | Door seal — EFLW600/800 · 5 kg EFLW500 · EFLW9002B |
Drum won’t spin up / loud slipping | Drive belt — EFL800 |
Door light flashing / won’t start | Door interlock switch — EFLW500/EFLW6 |
No fill / slow fill | Dual inlet valve |
Won’t sense water level / over- or under-fills | Pressure sensor — EFLW9 |
Lint over every load (top loaders) | Lint filter — ETLW70/80 · ETLW100 |
Who makes Esatto appliances?
Esatto is an Australian-market budget badge, not a manufacturer. The washers are OEM-built on standard front- and top-loader platforms, and the parts inside are common across several budget brands. The catalogue makes that visible: the EFL800 drive belt is the same part listed for Stirling, and the EFLW9 inlet valve is shared with a Technika model. Match your model series — EFLW for front loaders, ETLW for top loaders — and the right part is straightforward to find.
One part, several brands
That platform overlap is why Esatto is fixable when the original retailer can’t help. If you can’t see your exact model, browse every Esatto part we stock or run your model through the Part Finder — it cross-matches shared parts automatically.
The lint filter nobody thinks about
On Esatto top loaders, lint is caught in a small mesh basket that clips into the drum. After a couple of years the mesh splits or the clips snap, and suddenly every dark load comes out covered in fluff — and people blame the detergent for months. It’s a ~$22 part you swap by hand in seconds. If your washes are coming out linty, check the filter before anything else.
Frequently asked questions
Can you get spare parts for an Esatto washing machine?
Yes — seals, belts, interlocks, inlet valves, pressure sensors and lint filters for the EFLW and ETLW ranges, all in stock and shipped from Sydney, even though Esatto has no parts service of its own.
Where do I find the Esatto model number?
On the model sticker inside the door frame (front loaders) or under the lid (top loaders). Front loaders start with EFLW; top loaders with ETLW. Pop it into the Part Finder.
My Esatto leaks from the door — seal or pump?
Water at the front during the wash is the door seal; water that pools later or under the machine points to the pump or hoses. Peel back the seal’s lower lip and check for a split to confirm.
Washes coming out linty — is the machine dying?
No — it’s almost always a split lint filter on a top loader. Replace the filter and the problem disappears.
Same-day dispatch on Esatto parts?
Yes — before 12pm Sydney time, same-day dispatch Australia-wide, flat $10.60 shipping.
Related
- Esatto EFLW6 parts guide (door seal, handle, interlock)
- Esatto EFLW500 parts guide (seal, belt, interlock)
- Which door seal fits my budget front loader? Cross-reference guide
- All Esatto parts in stock
- Aldi / Stirling washing machine parts (shared belt platform)
- Esatto / GVA dryer filter grille outlet (dryer part)
- InAlto washing machine parts
Ready to fix it?
- Run your model number through the Oz Appliance Spares Part Finder — model in, exact-fit part out.
- Browse 3,000+ parts in stock
- Order before 12pm Sydney time → ships same day from our Sydney Northern Beaches warehouse, Australia-wide.
Disclaimer: this article is general information only and is provided without warranty of any kind. Appliance designs vary between models and production runs — always follow the manufacturer’s instructions, switch off and unplug the appliance before starting any work, and confirm parts against the model number on your appliance’s model sticker. Any repair is undertaken at your own risk and Oz Appliance Spares accepts no liability for injury, loss or damage arising from work performed after reading this guide, to the maximum extent permitted by law. If in doubt, use a qualified technician.
Appliance Spares
Leaking from the door during a wash
Drum won’t spin up / loud slipping
Door light flashing / won’t start
No fill / slow fill
Won’t sense water level / over- or under-fills
Lint over every load (top loaders)




