Appliance Spares
Description
About This Kit
Everything a banging, wobbling Haier front loader needs in one box: the Haier spider tripod assembly H0020100583 and the matching lip seal and drum bearing kit. Built for the HWF75AW1, HWF75AW2 — the same two parts we sell separately, packed together and priced $16.95 below buying them one at a time.
Spider tripod assemblyHaier H0020100583 Washing Machine Spider Tripod Assy HWD8040BW1, HWF75AW1,HWF75AW2,HWF75AW3Part number H0020100583Sold separately: $89.95
Lip seal & bearings kitHaier Washing machine Lip Seal & Bearings Kit HWF75AW1 HWF75AW2 HWM70-1201, 0167Sold separately: $52.95Why the two go in together. The spider is the aluminium casting that carries the drum on the shaft; the seal and bearings are what that shaft turns in. By the time a spider arm cracks the drum has been wobbling for weeks, hammering the bearings and letting water past the lip seal — and a set of bearings that has been run with a wobbling shaft is already on the way out. Fit a new spider on tired bearings and the noise is back within months; fit new bearings under a cracked spider and the wobble kills them again. It is a full drum-out job either way, so repairers replace both in the one strip-down. This kit gives you everything that job needs, priced below the two parts bought separately.
Not sure this fits your model? Check the model sticker and confirm with the Part Finder before ordering, or send us the model number and we will check every part in the kit.
- In stock in Sydney — order before 12pm AEST on a business day and the whole kit ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days — one delivery for all the parts
- 12-month warranty on every part in the kit
Specifications
| Part Type | Repair Kit — Spider & Bearing Kit |
|---|---|
| Fits Brand | Haier |
| Appliance | Washing Machine |
| Part Numbers | H0020100583 |
| Kit Code | OZKIT-SPB-HAIER-HWF75 |
| Parts in Kit | 2 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Kit
- Loud banging or knocking on the spin cycle, getting worse each week
- Drum wobbles or has visible play when you push it by hand
- Rumble or roar that grows with spin speed
- Grey or black marks on the washing, or rust-coloured water
- Machine walks or shakes violently on spin even when level
What’s In the Box
- 1 × spider tripod assembly (H0020100583)
- 1 × lip seal & bearings kit (seal + 2 bearings)
Fitting Overview
- Unplug the machine and turn off the taps. Remove the top, front and rear panels so the drum assembly can come out.
- Split the outer tub, lift out the inner drum and undo the three spider bolts (soak them in penetrating oil first — they corrode).
- Fit the new spider to the drum, drive the old bearings and seal out of the rear tub half and press the new bearings and lip seal in squarely.
- Reassemble, tighten the spider bolts evenly, reconnect and run a rinse-and-spin with the machine empty to check for noise and leaks.
Unplug the appliance before you start. Many owners fit this themselves with a model-specific video; if you would rather not, any local repairer can fit the parts you supply.
Compatible Models
Fits 2 models across 1 series:
- HWF: HWF75AW1, HWF75AW2
Every model above is listed on each individual part in this kit — find your model number on the appliance’s sticker and match it exactly against the list. Model not listed? Send it via the contact form and we will check the correct parts for you.
Frequently Asked Questions
What is included in this Haier spider and bearing kit?
Two products packed together: the Haier spider tripod assembly H0020100583 and the matching lip seal and drum bearing kit — the same items sold separately on this site, at a kit price $125.95 versus $142.90 bought individually.
Which Haier washing machines does the kit fit?
It fits the models listed on this page, including HWF75AW1, HWF75AW2. Match the model number on your machine's sticker (inside the door or on the back) exactly against the list; if your model is not listed, send it through the contact form and we will check both parts for you.
Do I really need to replace the bearings when I replace the spider?
In almost every case, yes. A cracked spider lets the drum wobble on its shaft, and that wobble hammers the bearings and lets water past the lip seal. Fitting a new spider onto worn bearings brings the noise back within months, which is why repairers replace both in the one strip-down.
How hard is a spider and bearing replacement to do myself?
It is the biggest job on a front loader — the whole drum assembly comes out and the tub is split — but it needs only hand tools, a socket set, a rubber mallet and a free afternoon. Many owners do it with a model-specific video; if you would rather not, any local repairer can fit the parts you supply.
How quickly will the kit ship?
Both parts are in stock in Sydney and ship together: order before 12pm AEST on a business day and it dispatches the same day. Delivery is $10.60 flat rate Australia-wide, typically 2–7 business days.
Browse more Haier appliance parts.
