Appliance Spares
Description
What this door seal fixes on a washing machine:
- water leaking from the bottom of the door during the wash or spin
- black mould or a split in the rubber lip that will not clean off
- a musty smell or grey marks left on washing
Fits: HWF75AN1, HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (45 to 90 minutes):
- Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
- Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
- Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
- Run a short rinse cycle empty and check for drips before you load it.
About This Part
Door seal suiting Haier front load washing machines in the 7.5 kg to 9.5 kg HWF range, listed against the HWF75AW3, HWF85ANB1 and HWF95ANB1 and their AN1-series siblings. The rubber boot between door and drum is a wear item: detergent, heat and trapped debris eventually split the folds or seed mould that scrubbing does not shift.
The first exterior sign is usually water at the front of the machine mid-wash, sometimes preceded by a musty smell on finished loads.
Fits models: HWF75AN1, HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1.
Warm water softens the new boot before fitting, and the flange should be wiped clean first.
Match the complete model code, including the letters after the capacity digits, from the sticker inside the door opening. Supplied new with a 12-month warranty.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Door Seal |
|---|---|
| Fits Brand | Haier |
| Appliance | Washing Machine |
| Part Numbers | 126721075121 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water on the floor mid-cycle
- Musty smell or mould on the seal
- Black marks appearing on clean loads
- Visible splits, tears or perished rubber
What’s In the Box
- 1 × Haier door seal
Compatible Models
Fits 6 models across 1 series:
- HWF: HWF75AN1, HWF75AW3, HWF85AN1, HWF85ANB1, HWF95AN1, HWF95ANB1
This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this door seal fit my Haier washing machine?
This Haier door seal fits the models listed on this page, including HWF75AN1, HWF75AW3, HWF85AN1 and HWF85ANB1. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more Haier appliance parts.
