Quick answer: Six faults cover almost every Haier washing machine job we see in our Sydney workshop: door seal mould or tear on the HWF front-loaders, drain pump failure (front-loader and top-loader), brake-actuator-motor lockup on the HWT top-loaders, inlet valves that quit filling, door interlock errors on the HWM/HWMP, and the slow-creeping leak from a…
Quick answer: Five faults cover almost every Westinghouse fridge we see in our Sydney workshop — clicks every few minutes but won’t run (PTC starter relay, $30, not the $400 compressor a tech might quote); F1 or F2 on the display (temperature sensor); ice building up on the back wall (defrost termination thermostat); warm fridge,…
Quick answer: Almost every LG washing machine fault we see in our Sydney workshop comes back to six parts: the door interlock switch (DE error — the single most common LG washer fault we sell parts for), the drain pump (OE error or won’t drain), the inlet valve (IE error — won’t fill), the motor…
Quick answer: Almost every Samsung washing machine fault we see in our Sydney workshop comes back to six parts: the inlet valve (4C / 4E error), the drain pump (5C / 5E error or won’t drain), the door seal (front-loader leak or mould), the door lock switch (DC / dE error), the tub seal and…
Quick answer: Six faults cover nearly every Fisher & Paykel washing machine problem we see in our Sydney workshop: won’t fill (inlet valve), drum noise on spin (suspension rods or rotor magnets), won’t drain (drain pump), warm wash stays cold (hot inlet valve coil), leak from underneath (drain pump housing or tub seal), and door…
Appliance Spares