Belts and repair parts for Simpson Maxidry and Minimax dryers are still available in Australia. There are three separate belt listings — one naming the Maxidry 1000S, 1000P, 1200S and 1200P; a twin pack naming the Maxidry 361, 362, 367, 452, 456, 457, 505 and 512; and one naming the Minimax 10, 10S
Parts for the Simpson Sirocco dryer family — the 350, 355, 450, 455, 500 and 550 — are still available in Australia, and the one that matters most is the heavy-duty fan belt: when it stretches or snaps, the dryer squeals, or the drum keeps turning while the clothes stay damp. Door catches, idler pul
Euromaid and Omega vented dryers — the OCD40WA, DM4KG and ED45KG — are built on a shared platform, and the parts listings name both brands, so one set of spares covers them. The parts that actually fail are the heating circuit and the belt, and the single most useful spare is the heat re
Yes, you can still get Inalto dryer parts in Australia, even though the brand has never had an easy-to-find factory spares channel. We carry the common failure parts for the IVD7 7 kg vented dryer (drum belt, fan blade, drum bearing kit, door hinge), the IHPD800W heat pump dryer (drum wheel ass
You do not need a readable model sticker to get parts for an old dryer. Check the three places the sticker usually lives first — inside the door rim, on the rear panel and around the lint filter housing — because on most machines it is faded rather than gone. If it really is unreadable, the name pri
Hoover-branded clothes dryers haven’t been sold new in Australia for many years, but plenty of them are still spinning away in laundries around the country. The parts that actually wear out — the poly-vee drive belt, the motor run capacitor, the rear drum bearing and the door catch — are still avail
A Samsung washing machine showing 5C — or 5E on older displays — has a drain fault: it could not pump the water out in time. The two most common causes are a blocked pump filter and a kinked or badly positioned drain hose. Start with the pump filter behind the small access panel, bottom right on mos
A Samsung washing machine showing 4C — or 4E on older displays — has detected a water supply fault: it is not filling with water quickly enough. The two most common causes are taps that are not fully open (or a kinked inlet hose) and blocked mesh filters where the inlet hoses screw into the machine.
On most Beko washing machines the model sticker is on the door rim, visible as soon as you open the porthole door; if it is not there, check the rear panel, which is the other common spot. Beko fridges usually keep the sticker inside the fresh food compartment, on a side wall or behind the crisper b
On most Fisher & Paykel top loaders the model sticker is under the lid, on the rim of the body; on most front loaders it is inside the door rim, visible as soon as you open the door. DishDrawer dishwashers usually carry the sticker on the side edge of the drawer itself, and Fisher & Paykel f
Appliance Spares