Appliance Spares
Description
What this door seal fixes on a washing machine:
- water leaking from the bottom of the door during the wash or spin
- black mould or a split in the rubber lip that will not clean off
- a musty smell or grey marks left on washing
Fits: WD10020D, WD11020D, WD12020D, WD13020D, WD12021D6, WD1200D, WD13020D1, WD-1433RD, WD14022D6, WD-1435RD, WD-1438RD, . Check the model number on the sticker inside the door or on the back before ordering.
Replace it (45 to 90 minutes):
- Unplug the machine and prise off the outer spring clamp with a flat screwdriver.
- Remove the top panel and detergent drawer so you can reach the inner clamp, then pull the old seal off the tub lip.
- Seat the new seal on the tub first, drain holes at the bottom, then fold it onto the front panel and refit both clamps.
- Run a short rinse cycle empty and check for drips before you load it.
About This Part
The door seal is the rubber ring that closes the gap between the drum opening and the door. When it perishes, splits or grows permanent mould, you’ll see water on the floor mid-cycle, notice musty-smelling washing, or find black marks on clean loads. A new seal restores the watertight fit and stops the damage spreading.
Replacing a door seal is a realistic DIY job for most owners — roughly 45–60 unhurried minutes with basic hand tools, no service callout needed. Unplug the appliance first and note how the old seal sits before easing it off.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $14.95 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Door Seal |
|---|---|
| Fits Brand | LG |
| Appliance | Washing Machine |
| Part Numbers | 4986ER1005C |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water on the floor mid-cycle
- Musty smell or mould on the seal
- Black marks appearing on clean loads
- Visible splits, tears or perished rubber
What’s In the Box
- 1 × LG door seal (4986ER1005C)
Compatible Models
Fits 11 models across 1 series:
- WD: WD-1433RD, WD-1435RD, WD-1438RD, WD10020D, WD11020D, WD1200D, WD12020D, WD12021D6, WD13020D1, WD14022D6,
This door seal fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this door seal fit my LG washing machine?
This door seal is LG part number 4986ER1005C and fits the models listed on this page, including WD-1433RD, WD-1435RD, WD-1438RD and WD10020D. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 12pm AEST (business days). Australia-wide delivery is $14.95 flat rate, typically 2-7 business days.
How do I replace this door seal?
Disconnect power before beginning any repair. Remove the old door seal, noting its orientation and any wiring connections. Fit the new part in the same position and reconnect. Test the appliance before completing reassembly.
Browse more LG appliance parts.
