Appliance Spares
Description
What this drain pump fixes on a dishwasher:
- water left in the drum at the end of the cycle
- the machine stops before spin or shows a drain fault
- a humming or grinding noise from the bottom of the machine with no water moving
Fits: TBD4SS, TBD4SS-2, TBD4SS-3. Check the model number on the sticker inside the door or on the back before ordering.
Replace it (30 to 60 minutes):
- Unplug the machine, drain it through the emergency hose and open the filter cover.
- Remove the kick panel, photograph the wiring, then unplug the pump connector.
- Release the pump from the housing or hoses, fit the new pump and reconnect the wiring and hoses.
- Refit the filter and run a rinse cycle to check it drains and does not leak.
About This Part
The drain pump pushes used water out of the machine at the end of each wash and spin stage. When it fails or jams you’ll typically find water still sitting in the drum, cycles stopping partway with a drain error, or a humming pump that moves no water. A working pump gets cycles finishing properly again.
Many owners fit this themselves; if you’d rather not, any local repairer can fit the part you supply.
- In stock in Sydney — order before 12pm AEST on a business day and it ships the same day
- $10.60 flat-rate delivery Australia-wide, typically 2–7 business days
- 12-month warranty on every part we sell
Specifications
| Part Type | Pump |
|---|---|
| Fits Brand | Technika Bellissimo |
| Appliance | Washing Machine |
| Part Numbers | 50293177-00/7 |
| OZ Reference | 0012 |
| Condition | Brand new |
| Warranty | 12 months |
Signs You Need This Part
- Water not draining from the machine after a wash cycle
- Machine displaying drain error codes
- Unusual humming or grinding noise during the drain phase
- Water pooling inside the drum at the end of a cycle
- Machine stopping mid-cycle during the drain stage
What’s In the Box
- 1 × Technika Bellissimo pump (50293177-00/7)
Compatible Models
GVA: GVADW12W
EURO: ED12GSA, ED8GSA, EDPR60WH, EDPR60SS
ARC: ADF6SE2
Suit Kleenmaid: KCDW6010S
Suit DAMANI: DDW60S
Suit Linea: LDW60S, LDW60W
Suit Venini: VDW60S, VDW60W
BDW60S, BDW60W
TDX6SS-3, TDX4SS, TDX7SS-3, TBD4SS TBD4SS-2 TBD4SS-3
CSDW60SS
RV45DW, RVDWSS, RVDWW, RV45DWSS
GUADW60SS,
This pump fits the models listed above – find your model number on the appliance’s rating sticker and match it exactly against the list. A part-number match is the quickest confirmation. Model not listed? Send it via the contact form and we’ll check the correct part for you.
Frequently Asked Questions
Will this fit my Technika Bellissimo washing machine?
This Technika Bellissimo pump fits the models listed on this page, including ADF6SE2, BDW60S, BDW60W and CSDW60SS. Find your model number on the appliance’s rating sticker and match it against the list. If your model isn’t listed, send us the model number and we’ll check the correct part before you buy.
How quickly will it ship?
Same-day dispatch from our Sydney warehouse on orders placed before 112pm AEST (business days). Australia-wide delivery is $10.60 flat rate, typically 2–7 business days depending on location.
How do I replace this pump?
Disconnect power and lay towels down — residual water will spill. Access the pump from the front or bottom panel, disconnect the hoses and electrical connector, unscrew the mounting, and fit the new pump in reverse order. Run an empty drain cycle to test.
Browse more Technika Bellissimo washing machine parts.
